Skip to main content
Luminous SLVS-EC Rx FMC Card
Interface card for connecting Luminous Sensor EVM series with FMC connector platforms such as FPGA development kits
Overview
- This card is designed for use with FMC connector platforms such as FPGA development kits.
- Combine this card with the following products to enable early evaluation of our SLVS-EC v3.0 Rx IP.
- FPGA development kit with FMC connector
- Luminous Sensor EVM
- IMX537 Sensor EVM: Scheduled for release at the end of 2024.
- SLVS-EC v3.0 Sensor EVM: Scheduled for release in the first half of 2025.
- The board size is 76 mm x 69 mm (typ.).
- For inquiries about the scheduled release date of each product, please click the "Contact Us" button at the bottom of this page.
Features
- Equipped with an FMC connector supporting up to 8 transceivers.
- Onboard reference clock for transceivers (selectable from 72/74.25/144/148.5MHz).
- Supports Vadj ranging from 1.2 to 3.3V.
- I2C/SPI selectable as control interface from FPGA to sensor.
- Control interface can be operated independently from the FPGA for external control.
- Utilizes Samtec Edge Rate® connector for interfacing with sensor boards.
Block diagram
Using the Development kit
< Our Related Solutions >